How much HP can a stock 7.3 Transmission handle?
As long as the 7.3L Power Stroke goes unmodified, the factory E4OD will generally live a while. Although, it can still be killed at the stock 210 hp and 425 lb-ft level with heavy abuse.
How much boost can a stock 7.3 handle?
‘94.5-’99 7.3L: 380 to 400rwhp
Either charger can hold up to 30-35 psi of boost for a while, but 40 psi or more is asking a lot for a turbo that was originally intended to see a maximum of 17 to 23 psi.
How much HP can a 7.3 make?
Ford’s 7.3-Liter V-8 Can Make 600 Naturally-Aspirated Horsepower With Basic Mods. The giant gasoline V-8 in Ford’s new Super Duty pickups can make huge naturally-aspirated power—and it can fit in a Fox-body Mustang.
How much HP does a tuned 7.3 have?
’99-03 7.3L Power Stroke
Depending on the model year, Super Duty trucks from this era laid down 190 to 210 rwhp in stock form. Well-tuned early ’99 trucks typically make 290 to 300 hp, while later models usually make anywhere from 300 to 320 hp (and we’ve even seen one clear 330 hp).
How much HP does a 7.3 diesel have?
7.3L Power Stroke Specs
|Engine:||7.3L Power Stroke diesel V-8|
|Peak Horsepower:||• 210 hp @ 3,000 rpm (intro horsepower rating, 1994 MY) • 275 hp @ 2,800 rpm (peak horsepower rating, 2003 MY)|
|Peak Torque:||• 425 lb-ft @ 2,000 rpm (intro torque rating, 1994 MY) • 525 lb-ft @ 1,600 rpm (peak torque rating, 2003 MY)|
How much torque can a 4R100 handle?
The trans is “rated” for 1000ft/lbs of torque.
How big is a stock 7.3 turbo?
A stock 7.3 has a 76mm major compressor diameter and a much smaller inducer bore. A 76mm inducer turbo such as a Sledgehammer, is a totally different animal and a BMF at that.
Is a wicked wheel worth it?
Wicked wheel is a waste of money. In general, very few “special” compressor wheels are worth a damn. Any who, the stock turbo limitation is in the turbine. Put a bigger turbine wheel on the stock turbo and the stock compressor wheel will give you 600hp.
How much boost can a stock 2001 7.3 handle?
A stock truck should put out 15-17lbs max.
How do you get 500hp out of a 7.3 Powerstroke?
Aside from adding a chip, a considerable up-sizing of the fuel injectors is mandatory to get any kind of measurable horsepower out of a 7.3L Power Stroke. For us, the only option is to upgrade to a set of hybrid injectors, and specifically the 238cc version for 500hp goals.
How much HP can a 7.3 Godzilla handle?
Amazingly, the camshaft, rods, and pistons were all left stock.
How much HP does a 2000 7.3 have?
Adjustments were made also every year to the 7.3l Powerstroke that made these trucks more powerful, especially in later models. Late model 7.3s, 2000-2003 model years, came from the factory with 275 horsepower and 525 lb-ft of torque when paired with the 6-speed manual transmission.
How much is a 7.3 Godzilla motor?
Priced at $7,000 excluding the FEAD kit and control pack, the 7.3-liter Godzilla is a sweetheart of the go-faster community for many reasons. Not only does it feature period-correct pushrods for simplicity, but the big-block V8 is tough thanks to a cast-iron block and forged crankshaft.
How much horsepower will a tuner add?
2. Do they improve speed and acceleration? Using a tuner it is possible to increase gasoline or diesel engine performance up to 99 horsepower and 88 lb-ft of torque on a gas truck, and 120 horsepower and 240 lb-ft of torque on a diesel truck depending upon the model.
Why is Ford making a 7.3 gas?
“That led us to a torque-per-liter value and a power-per-liter value, [which] knowing that, boxed us to 7.3 liters.” For fuel efficiency’s sake, Ford engineers determined they wanted the engine to generate peak power at what Beltramo considers “relatively low” RPMs. “That’s what led us to a pushrod two-valve.