How do you wire a trolling motor plug?

How do you wire a 24 volt trolling motor plug?

Feed the wires through the plug housing. On the 12-24V trolling motor plug, connect the positive 24V wire to the terminal marked “24”, the 12V wire to the terminal marked “12” and the negative wire to the terminal marked “-”. On straight 24V trolling motors, connect the two wires to “24” and “-” as appropriate.

Why does my trolling motor plug have 3 wires?

The three wire plug is for a 12/24V system. On a 12/24 you have a 12V hot, 24V hot, and a ground.

Which wire is positive on trolling motor?

The circuit breaker should be linked directly to your trolling motor, connecting the positive (red) lead from the motor to the positive terminal on the circuit breaker. The circuit breaker should then be connected to your first battery from its negative terminal to the positive terminal on the battery.

Can you connect trolling motor directly to battery?

Connect the 12-volt trolling motors to a single 12-volt battery by simply fastening the black negative lead from the motor to the negative battery terminal, and the red positive lead from the trolling motor to the positive battery terminal. Include a 50-amp circuit breaker on the positive connection.

IMPORTANT:  Best answer: Is it bad to turn car off with AC on?

How do I know if my trolling motor is 12 or 24 volt?

The nameplates are most often found in the foot petals of the motor. Otherwise, you can look at the configuration of the trolling motor batteries to find the volts. Open the hood and look at the battery. If you see 6 cells, it’s a 12-volt battery, but if you see 12 cells, it means it’s a 24-volt battery.

Are trolling motor plugs universal?

Unfortunately, most trolling motor plugs and receptacles are not compatible with each other as there isn’t a universal plug design.

Do trolling motors need a circuit breaker?

It is highly recommended that a circuit breaker or fuse be used when installing a trolling motor. … For motors requiring a 60-amp breaker, the Minn Kota MKR-19 60-amp circuit breaker is recommended.

Why does my trolling motor have 4 wires?

To make charging easier, the 4 prong/4 wire system became standard on several bassboats. This, in effect, moved the 4 battery post up to the boat side of the plug and configured them in such a way as the two negatives were side by side and the two positives were side by side.

What is the orange wire for on a trolling motor plug?

The red wire is for the +12volt connection. The orange wire is for the +24Volt connection. So, back on the batteries, the black wire is connected to the – terminal of battery #2. The red wire is wired to the + terminal of battery #2.

What size wire should I use for a trolling motor?

Many trolling motors can be used with 8 gauge wire, however, the length of wire you need and the amperage of your motor can alter the size of wire you need. For example, if you need a longer length of wire, you’ll likely need a lower gauge and therefore thicker wire.

IMPORTANT:  Question: How long should I charge my car battery if its completely dead?

Do trolling motor batteries need to be grounded?

However, it certainly is not either recommended or required. In NO event should you ever ground your batteries to your boats hull. Doing this can lead to all sorts of issues with galvanic corrosion in the hull.