You asked: Can I use a 52v battery on a 36v motor?

Can I use a higher voltage battery on my ebike?

When you swap for a higher voltage battery, it can supply more power to the motor and provide significant increase in speed and acceleration. A more powerful battery (larger AH rating of the same voltage) will extend the range of ebike travel but will supply an insignificant amount of additional power to the motor.

Can I put a 48 volt battery in my 36 volt ebike?

Your 36V controller might not work with a 48V battery. It might be programmed to fault out and quit when voltage exceeds a preset level. Low voltage cutoff will be set for a 36V battery, not 48V, so it will not protect your 48V battery.

Can you use a 24V battery on a 36V motor?

Thus, one can use a 24V to run a 36V trolling motor. … You can run a 36V trolling motor on 24V, but I would not recommend doing so. If you want to do it, in case of an emergency, you need to know few things first, along with the potential drawbacks of running a 36V trolling motor on 24V.

IMPORTANT:  How much is it to get a car radio fixed?

Can I use a 48V controller with a 36V motor?

Re: 36v motor with 48v controller

YES! I do IT currently! 33km/h in 36v regen -> 43km/h in 48v regen, no problem.

Is 36v or 48V better?

A battery with a higher voltage would offer more power. … A 36V e-bike battery will allow you to draw a lesser critical current, typically around 15 amperes whereas, a 48V e-bike battery will allow more current in the range of 10 – 40 amperes. It means you can go faster with a 48V E-bike battery.

Which is better 48V or 52V battery?

The Difference Between 48V and 52V Batteries

The difference between the two is power and performance: A 52V battery delivers better performance. A higher-voltage battery provides greater efficiency, with the battery using less electricity to provide the same or better power for the bike.

Can you put 48v batteries in a 36v golf cart?

Putting 48V behind a motor that is designed to run 3500rpm (or whatever it may be) at 36V will, in fact, make her run faster. Swap the motor with the battery bank and controller and you will see no speed increase until you reprogram the controller for higher speeds.

Can I charge a 48v battery with a 36v charger?

Generally speaking, yes, yes it will. No matter what kind of battery you’re charging, if you hook up a 36v battery to a 48v charger and let it charge to completion, you’re going to ruin your battery.

Will 36V trolling motor run on 24V?

According to Minn Kota you can run a 36 volt motor on 24 volts: BUT, it will run hotter, draw more amps, deplete the batteries sooner, and run the risk of damaging the batteries from over heating. The iPilot function and steering motor may not work.

IMPORTANT:  Are leather seats in cars worth it?

Can you use a 36V trolling motor on 24V?

You really do not want to run a 36 V trolling motor system on 24V for an extended period of time. You will heat up your batteries and ruin them. The reality is that 3 12V batteries can get to 24V over use in the day and the trolling motor will run, albeit very slow.

Will a 12V battery power a 36V motor?

If you are talking DC motor then putting 12V into a 36V motor just makes it go slow with less torque. No harm done, unless having less torque means that the motor sits there stalled because it hasn’t enough power to turn it’s load yet there may be enough current flowing to overheat one armature winding.

Can a 48V controller handle 36v?

usually the 48V conversion on a 36V controller will work but you can change the input power resistors too if needed.

Can a 36v battery run a 48V motor?

So, your 36V 1kW controller will likely be a 28A controller. This means your 48V motor will not be 1000W on that controller, it will only be 750W. That means that while the controller won’t be overloaded the maximum power output might not be sufficient for your needs.

How fast can a 36v electric bike go?

Most ebikes have a top speed of 20 to 25 mph.